MK11 xTreme Mod - NPC/Announcer/Camera Mod
- atributes16
- Warrior
- Posts: 218
- Joined: Wed Jul 01, 2015 11:40 am
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
I did what you said but always have problem.
I always heard ctrl+1 command: 1 player npc trainer activated. I can do this once and twice and heard the same.
Also if I've tried i can heard ctrl+2 command about 2 players.
Later I've heard before choose variation FGLK/Kronika/Sektor/Cyrax activated, but I don't see results when I choose stage (I don't see Fighters I've chosen via NPC Mod) and later also see the same Fighters I don't want to choose (fro example choose Kano, using mod for Kronika, and unfortunatlly playing as Kano not as Kronika). I'm lost because of 1st player / 2 players mod. I always think cheat engine really don't add cheat table file to game process (MK11.exe without CE detection from one site there on mksecrets.com forums)
I always heard ctrl+1 command: 1 player npc trainer activated. I can do this once and twice and heard the same.
Also if I've tried i can heard ctrl+2 command about 2 players.
Later I've heard before choose variation FGLK/Kronika/Sektor/Cyrax activated, but I don't see results when I choose stage (I don't see Fighters I've chosen via NPC Mod) and later also see the same Fighters I don't want to choose (fro example choose Kano, using mod for Kronika, and unfortunatlly playing as Kano not as Kronika). I'm lost because of 1st player / 2 players mod. I always think cheat engine really don't add cheat table file to game process (MK11.exe without CE detection from one site there on mksecrets.com forums)
- atributes16
- Warrior
- Posts: 218
- Joined: Wed Jul 01, 2015 11:40 am
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
atributes16 wrote:I did what you said but always have problem.
I always heard ctrl+1 command: 1 player npc trainer activated. I can do this once and twice and heard the same.
Also if I've tried i can heard ctrl+2 command about 2 players.
Later I've heard before choose variation FGLK/Kronika/Sektor/Cyrax activated, but I don't see results when I choose stage (I don't see Fighters I've chosen via NPC Mod) and later also see the same Fighters I don't want to choose (fro example choose Kano, using mod for Kronika, and unfortunatlly playing as Kano not as Kronika). I'm lost because of 1st player / 2 players mod. I always think cheat engine really don't add cheat table file to game process (MK11.exe without CE detection from one site there on mksecrets.com forums)
From this site
https://drive.google.com/file/d/1s4e83s ... sp=sharing
- _ix_
- Warrior
- Posts: 162
- Joined: Sun May 17, 2020 9:39 am
- Side: Light
- PSN: PC player
- XBox Live: PC player
- Location: One foot on the grave, EU
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Skall, I made a few corrections to your file.Skall wrote:Hi everyone!
I've made an update of the Free Camera made and I've added a Timestop.
You will find here the update + the NoHUD made by Helix and a README
Cheers,
- pFOV was missing the Increase Value section.
- Changed value by which the camera POV changes. Original values were too low to move the camera quickly.
- Changed the key mapping to something more easy of use (for me).
- Attachments
-
- MK11_Cam_SPA.rar
- Camera Mod by Skall, with some changes.
Working with the patch from 08/JUL/2020 - (4.5 KiB) Downloaded 233 times
I enjoy making MK11 videos from different angles - Check it out on YT
- thethiny
- Immortal
- Posts: 2260
- Joined: Fri Jan 17, 2014 12:08 pm
- Side: Light
- PSN: thethiny
- XBox Live: thethiny
- Location: Earthrealm
- Contact:
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Added to main post
- atributes16
- Warrior
- Posts: 218
- Joined: Wed Jul 01, 2015 11:40 am
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Thiny. What about Xtreme Mod? I always have problens. No matters it is updated or not. Only Mod Anouncer says something it is activated or not, but still find bugs. Two and more times in row Heard this 1st player mod activated or mainly if something work always jump to 2players mod and cannot use for 1player. I really don't know how it's working. For me it's dark magic...thethiny wrote:Added to main post
and also don't see "fight" on choosing stage screen and later don't see fighters i've activated on real stage. Please can you send me an "ritual" how to do this for every possibility (I don't know how not to lose myself in this labirynth), or can you add maybe something easier to do this? Please help me.
- thethiny
- Immortal
- Posts: 2260
- Joined: Fri Jan 17, 2014 12:08 pm
- Side: Light
- PSN: thethiny
- XBox Live: thethiny
- Location: Earthrealm
- Contact:
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
I think they changed something because some things aren't working the same way anymore.
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Thanks a lot man! I sadly don't have time to spend atm on this._ix_ wrote:Skall, I made a few corrections to your file.Skall wrote:Hi everyone!
I've made an update of the Free Camera made and I've added a Timestop.
You will find here the update + the NoHUD made by Helix and a README
Cheers,
These changes make it easy to manipulate the camera, but make the movement somewhat "jerky" and not as fluid as I would like. Any way to improve this?
- pFOV was missing the Increase Value section.
- Changed value by which the camera POV changes. Original values were too low to move the camera quickly.
- Changed the key mapping to something more easy of use (for me).
There is a way to create a smooth camera, but it's ultimately in LUA or C++ and idk how to do programming yet. Will check one day about all of this kind of stuff.
- atributes16
- Warrior
- Posts: 218
- Joined: Wed Jul 01, 2015 11:40 am
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Is there any new possibilities for xtreme mod?thethiny wrote:I think they changed something because some things aren't working the same way anymore.
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Great job on the update. I was wondering how I can slow the speed of the camera just a little?_ix_ wrote:Skall, I made a few corrections to your file.Skall wrote:Hi everyone!
I've made an update of the Free Camera made and I've added a Timestop.
You will find here the update + the NoHUD made by Helix and a README
Cheers,
These changes make it easy to manipulate the camera, but make the movement somewhat "jerky" and not as fluid as I would like. Any way to improve this?
- pFOV was missing the Increase Value section.
- Changed value by which the camera POV changes. Original values were too low to move the camera quickly.
- Changed the key mapping to something more easy of use (for me).
- _ix_
- Warrior
- Posts: 162
- Joined: Sun May 17, 2020 9:39 am
- Side: Light
- PSN: PC player
- XBox Live: PC player
- Location: One foot on the grave, EU
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Actually, I found out how to make the camera motion smoother and made some other changes to the camera mod, so it's not too fast (see annexed file).Scorp-Sub wrote:Great job on the update. I was wondering how I can slow the speed of the camera just a little?_ix_ wrote:Skall, I made a few corrections to your file.Skall wrote:Hi everyone!
I've made an update of the Free Camera made and I've added a Timestop.
You will find here the update + the NoHUD made by Helix and a README
Cheers,
These changes make it easy to manipulate the camera, but make the movement somewhat "jerky" and not as fluid as I would like. Any way to improve this?
- pFOV was missing the Increase Value section.
- Changed value by which the camera POV changes. Original values were too low to move the camera quickly.
- Changed the key mapping to something more easy of use (for me).
In order to get a smooth camera motion you need to do the following:
- Open CE and click on settings (upper right corner, below the E sign).
- Go to HotKeys (3rd entry on the left)
- Change the Keypoll intervall and Delay between reactivating hotkeys to 1. Default is 100.
- Use the updated camera mod in this post and the motion will be much smoother and not too fast. Just perfect.
- If however you want to change the values and make the camera movement faster or slower, you can edit the file and change the <Value> section on the specific node you want to change. Make it higher for faster motion, or lower for slower motion
- Attachments
-
- MK11_Cam_SPA.rar
- (4.47 KiB) Downloaded 233 times
I enjoy making MK11 videos from different angles - Check it out on YT
- Straight Edge
- Mortal
- Posts: 5
- Joined: Tue Jul 01, 2014 7:33 pm
- PSN: NR-Wesker
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Total noob here. Wanted to ask can anyone tell me how to manipulate the camera after loading the CE table? so far i've only gotten as far as zooming in and out with the increase/decrease on the numb-pad. I've never used CE all that much before and have watched a few tutorial vids, but haven't come across any on how to use the MK11 camera mod/CE table.
- atributes16
- Warrior
- Posts: 218
- Joined: Wed Jul 01, 2015 11:40 am
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
@thethiny. I want to ask. Can you split it on 2 other chats. Here are mainly camera mod. How much time i look there. Nothing can't find about xtreme mod and it is dead under the camera mod avalanche.
I'm losing myself. Where should be unlocker for augments and their equipment slots. Because I don't know now
I'm losing myself. Where should be unlocker for augments and their equipment slots. Because I don't know now
- _ix_
- Warrior
- Posts: 162
- Joined: Sun May 17, 2020 9:39 am
- Side: Light
- PSN: PC player
- XBox Live: PC player
- Location: One foot on the grave, EU
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
I'll try to help you. It's not complicated, but if you get lost, I may put up a video for clarity.Straight Edge wrote:Total noob here. Wanted to ask can anyone tell me how to manipulate the camera after loading the CE table? so far i've only gotten as far as zooming in and out with the increase/decrease on the numb-pad. I've never used CE all that much before and have watched a few tutorial vids, but haven't come across any on how to use the MK11 camera mod/CE table.
1. Open MK11 and go into practice mode. Select 2 characters and a stage.
2. Let it load completely.
3. Open CE, select the MK11 process and load the MK11_Cam_SPA.CT (Camera mode Table).
4. Click on the checkbox that says "GetCamera" and return to the practice mode. Some values will populate on CE.
5. Go back to CE and click on the checkbox FOV, Kill X,YZ, Kill Yaw and KillPitch. Do it in this sequence.
6. Go back to MK11 practice mode where you see the characters.
7. Use Numpad 4,6 to go left and right. Numpad 8 and 2 to go forward and backwards.
8. Numpad 7 and 1 control the height of the POV (higher or lower)
9. Numpad 9 and 3 control the rotation of the POV.
10. The arrow keys (not numpad) control the pitch of the camera. Rotate left or right, or up and down.
11. Numpad +/- controls the Field of View but the default value should be OK for most usages. Use it if you want to really zoom out or zoom in from the action.
12. If you really want to lock the POV to the current position (some Krushing blows, Fatal blows will reset the POV), then make sure to click all the checkboxes in CE.
13. If you want to go back to the normal POV, just uncheck the checkboxes in CE, in reverse order, starting down up.
Note that, if you rotate your POV 180 degrees the left right controls will be switched.
I hope this helps. If not, let me know and I'll put up a video.
Have fun.
I enjoy making MK11 videos from different angles - Check it out on YT
- Straight Edge
- Mortal
- Posts: 5
- Joined: Tue Jul 01, 2014 7:33 pm
- PSN: NR-Wesker
Re: MK11 xTreme Mod - NPC/Announcer/Camera Mod
Thanks very much for taking the time to explain. I followed your directions and it works perfectly. The hotkeys/shortcuts are gonna take some getting used to, but I ain't complaining. Thanks again!_ix_ wrote:I'll try to help you. It's not complicated, but if you get lost, I may put up a video for clarity.Straight Edge wrote:Total noob here. Wanted to ask can anyone tell me how to manipulate the camera after loading the CE table? so far i've only gotten as far as zooming in and out with the increase/decrease on the numb-pad. I've never used CE all that much before and have watched a few tutorial vids, but haven't come across any on how to use the MK11 camera mod/CE table.
1. Open MK11 and go into practice mode. Select 2 characters and a stage.
2. Let it load completely.
3. Open CE, select the MK11 process and load the MK11_Cam_SPA.CT (Camera mode Table).
4. Click on the checkbox that says "GetCamera" and return to the practice mode. Some values will populate on CE.
5. Go back to CE and click on the checkbox FOV, Kill X,YZ, Kill Yaw and KillPitch. Do it in this sequence.
6. Go back to MK11 practice mode where you see the characters.
7. Use Numpad 4,6 to go left and right. Numpad 8 and 2 to go forward and backwards.
8. Numpad 7 and 1 control the height of the POV (higher or lower)
9. Numpad 9 and 3 control the rotation of the POV.
10. The arrow keys (not numpad) control the pitch of the camera. Rotate left or right, or up and down.
11. Numpad +/- controls the Field of View but the default value should be OK for most usages. Use it if you want to really zoom out or zoom in from the action.
12. If you really want to lock the POV to the current position (some Krushing blows, Fatal blows will reset the POV), then make sure to click all the checkboxes in CE.
13. If you want to go back to the normal POV, just uncheck the checkboxes in CE, in reverse order, starting down up.
Note that, if you rotate your POV 180 degrees the left right controls will be switched.
I hope this helps. If not, let me know and I'll put up a video.
Have fun.